BHP+79 hp (14%)
Standard
571 hp
Tuned
650 hp
Torque+100 Nm (13%)
Standard
750 Nm
Tuned
850 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumMercedes-Benz E 63 AMG 571hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 63 AMG 571hp? A Stage 1 remap can take this W213 - 2016 - 2019 petrol engine from 571 BHP to 650 BHP and from 750 Nm to 850 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 9thof 102 Mercedes-Benz E engines by power gain
- 95%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 63 AMG 571hp is a 4.0L naturally aspirated petrol engine producing 571 BHP and 750 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 650 BHP and 850 Nm — a gain of around 79 BHP (14%) and 100 Nm (13%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.