BHP+19 hp (5%)
Standard
401 hp
Tuned
420 hp
Torque+100 Nm (19%)
Standard
520 Nm
Tuned
620 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumMercedes-Benz E 43 AMG 401hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 43 AMG 401hp? A Stage 1 remap can take this W213 - 2016 - 2019 petrol engine from 401 BHP to 420 BHP and from 520 Nm to 620 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 92ndof 102 Mercedes-Benz E engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 43 AMG 401hp is a 3.0L naturally aspirated petrol engine producing 401 BHP and 520 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 420 BHP and 620 Nm — a gain of around 19 BHP (5%) and 100 Nm (19%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.