BHP+20 hp (8%)
Standard
245 hp
Tuned
265 hp
Torque+50 Nm (14%)
Standard
370 Nm
Tuned
420 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumMercedes-Benz E 300 - 245hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 300 - 245hp? A Stage 1 remap can take this W213 - 2016 - 2019 petrol engine from 245 BHP to 265 BHP and from 370 Nm to 420 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 83rdof 102 Mercedes-Benz E engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 300 - 245hp is a 2.0L naturally aspirated petrol engine producing 245 BHP and 370 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 265 BHP and 420 Nm — a gain of around 20 BHP (8%) and 50 Nm (14%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.