BHP+20 hp (13%)
Standard
160 hp
Tuned
180 hp
Torque+40 Nm (11%)
Standard
360 Nm
Tuned
400 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumMercedes-Benz E 200d 160hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 200d 160hp? A Stage 1 remap can take this W213 - 2016 - 2019 diesel engine from 160 BHP to 180 BHP and from 360 Nm to 400 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 83rdof 102 Mercedes-Benz E engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 200d 160hp is a 1.6L turbocharged diesel engine producing 160 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 400 Nm — a gain of around 20 BHP (12%) and 40 Nm (11%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other E W213 - 2016 - 2019 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 200d 150hp | 150 → 200 |