BHP+50 hp (33%)
Standard
150 hp
Tuned
200 hp
Torque+80 Nm (22%)
Standard
360 Nm
Tuned
440 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighMercedes-Benz E 200d 150hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 200d 150hp? A Stage 1 remap can take this W213 - 2016 - 2019 diesel engine from 150 BHP to 200 BHP and from 360 Nm to 440 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 29thof 102 Mercedes-Benz E engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 200d 150hp is a 1.9L turbocharged diesel engine producing 150 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 440 Nm — a gain of around 50 BHP (33%) and 80 Nm (22%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other E W213 - 2016 - 2019 Engines
| Engine | BHP | Gain | Torque |
|---|