BHP+70 hp (13%)
Standard
540 hp
Tuned
610 hp
Torque+450 Nm (19%)
Standard
2350 Nm
Tuned
2800 Nm
Suitability
Good (7/10)Gains Profile
Torque-focusedHeadroom
MediumIveco Stralis 540hp ECU Remapping
Considering an ECU remap for your Iveco Stralis 540hp? A Stage 1 remap can take this All diesel engine from 540 BHP to 610 BHP and from 2350 Nm to 2800 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Stralis can achieve.
How this engine compares
- 2ndof 14 Iveco Stralis engines by power gain
- 92%of the 9,842 engines we hold gain data for see a smaller power increase
- 99%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco Stralis 540hp is a turbocharged diesel engine producing 540 BHP and 2350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 610 BHP and 2800 Nm — a gain of around 70 BHP (13%) and 450 Nm (19%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Stralis All Engines
| Engine | BHP | Gain |
|---|