BHP+57 hp (21%)
Standard
273 hp
Tuned
330 hp
Torque+210 Nm (22%)
Standard
950 Nm
Tuned
1160 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighIveco Stralis 273hp ECU Remapping
Considering an ECU remap for your Iveco Stralis 273hp? A Stage 1 remap can take this All diesel engine from 273 BHP to 330 BHP and from 950 Nm to 1160 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Stralis can achieve.
How this engine compares
- 14thof 14 Iveco Stralis engines by power gain
- 84%of the 9,842 engines we hold gain data for see a smaller power increase
- 95%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco Stralis 273hp is a turbocharged diesel engine producing 273 BHP and 950 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 330 BHP and 1160 Nm — a gain of around 57 BHP (21%) and 210 Nm (22%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Stralis All Engines
| Engine | BHP | Gain | Torque |
|---|