BHP+60 hp (17%)
Standard
360 hp
Tuned
420 hp
Torque+350 Nm (23%)
Standard
1500 Nm
Tuned
1850 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighIveco Stralis 360hp ECU Remapping
Considering an ECU remap for your Iveco Stralis 360hp? A Stage 1 remap can take this All diesel engine from 360 BHP to 420 BHP and from 1500 Nm to 1850 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Stralis can achieve.
How this engine compares
- 9thof 14 Iveco Stralis engines by power gain
- 86%of the 9,842 engines we hold gain data for see a smaller power increase
- 98%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco Stralis 360hp is a turbocharged diesel engine producing 360 BHP and 1500 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 420 BHP and 1850 Nm — a gain of around 60 BHP (17%) and 350 Nm (23%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Stralis All Engines
| Engine | BHP | Gain |
|---|