BHP+60 hp (18%)
Standard
330 hp
Tuned
390 hp
Torque+320 Nm (23%)
Standard
1400 Nm
Tuned
1720 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighIveco Stralis 330hp ECU Remapping
Considering an ECU remap for your Iveco Stralis 330hp? A Stage 1 remap can take this All diesel engine from 330 BHP to 390 BHP and from 1400 Nm to 1720 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Stralis can achieve.
How this engine compares
- 9thof 14 Iveco Stralis engines by power gain
- 86%of the 9,842 engines we hold gain data for see a smaller power increase
- 98%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco Stralis 330hp is a turbocharged diesel engine producing 330 BHP and 1400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 390 BHP and 1720 Nm — a gain of around 60 BHP (18%) and 320 Nm (23%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Stralis All Engines
| Engine | BHP | Gain | Torque |
|---|