BHP+60 hp (19%)
Standard
310 hp
Tuned
370 hp
Torque+320 Nm (25%)
Standard
1300 Nm
Tuned
1620 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighIveco Stralis 310hp ECU Remapping
Considering an ECU remap for your Iveco Stralis 310hp? A Stage 1 remap can take this All diesel engine from 310 BHP to 370 BHP and from 1300 Nm to 1620 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco Stralis can achieve.
How this engine compares
- 9thof 14 Iveco Stralis engines by power gain
- 86%of the 9,842 engines we hold gain data for see a smaller power increase
- 98%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco Stralis 310hp is a turbocharged diesel engine producing 310 BHP and 1300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 370 BHP and 1620 Nm — a gain of around 60 BHP (19%) and 320 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Stralis All Engines
| Engine | BHP | Gain | Torque |
|---|