BHP+10 hp (13%)
Standard
80 hp
Tuned
90 hp
Torque+20 Nm (21%)
Standard
95 Nm
Tuned
115 Nm
Suitability
Moderate (5.5/10)Gains Profile
Torque-focusedHeadroom
MediumSeat Ibiza 1.0 MPI 80hp ECU Remapping
Considering an ECU remap for your Seat Ibiza 1.0 MPI 80hp? A Stage 1 remap can take this 2017 -> ( A0 ) petrol engine from 80 BHP to 90 BHP and from 95 Nm to 115 Nm of torque (naturally aspirated). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Ibiza can achieve.
How this engine compares
- 50thof 62 Seat Ibiza engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Ibiza 1.0 MPI 80hp is a 1.0L naturally aspirated petrol engine producing 80 BHP and 95 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 90 BHP and 115 Nm — a gain of around 10 BHP (12%) and 20 Nm (21%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Ibiza 2017 -> ( A0 ) Engines
| Engine | BHP | Gain | Torque | Gain |
|---|