BHP+8 hp (7%)
Standard
110 hp
Tuned
118 hp
Torque+14 Nm (9%)
Standard
155 Nm
Tuned
169 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowSeat Ibiza 1.0 MPI 110hp ECU Remapping
Considering an ECU remap for your Seat Ibiza 1.0 MPI 110hp? A Stage 1 remap can take this 2017 -> ( A0 ) petrol engine from 110 BHP to 118 BHP and from 155 Nm to 169 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Ibiza can achieve.
How this engine compares
- 58thof 62 Seat Ibiza engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Ibiza 1.0 MPI 110hp is a 1.0L naturally aspirated petrol engine producing 110 BHP and 155 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 118 BHP and 169 Nm — a gain of around 8 BHP (7%) and 14 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Ibiza 2017 -> ( A0 ) Engines
| Engine | BHP | Gain | Torque | Gain |
|---|