BHP+80 hp (17%)
Standard
480 hp
Tuned
560 hp
Torque+420 Nm (19%)
Standard
2250 Nm
Tuned
2670 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumScania Trucks R-Series 480 ECU Remapping
Considering an ECU remap for your Scania Trucks R-Series 480? A Stage 1 remap can take this All diesel engine from 480 BHP to 560 BHP and from 2250 Nm to 2670 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Scania Trucks R-Series can achieve.
How this engine compares
- 6thof 16 Scania Trucks R-Series engines by power gain
- 95%of the 9,842 engines we hold gain data for see a smaller power increase
- 99%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Scania Trucks R-Serie 480 is a turbocharged diesel engine producing 480 BHP and 2250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 560 BHP and 2670 Nm — a gain of around 80 BHP (17%) and 420 Nm (19%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other R-Series All Engines
| Engine | BHP | Gain |
|---|