BHP+23 hp (13%)
Standard
180 hp
Tuned
203 hp
Torque+27 Nm (12%)
Standard
231 Nm
Tuned
258 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumKia K5 2.4i 180hp ECU Remapping
Considering an ECU remap for your Kia K5 2.4i 180hp? A Stage 1 remap can take this 2010 - 2015 petrol engine from 180 BHP to 203 BHP and from 231 Nm to 258 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia K5 can achieve.
How this engine compares
- 6thof 9 Kia K5 engines by power gain
- 26%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia K5 2.4i 180hp is a 2.4L naturally aspirated petrol engine producing 180 BHP and 231 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 203 BHP and 258 Nm — a gain of around 23 BHP (13%) and 27 Nm (12%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other K5 2010 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|