BHP+25 hp (12%)
Standard
204 hp
Tuned
229 hp
Torque+19 Nm (8%)
Standard
252 Nm
Tuned
271 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowKia K5 2.4 GDI 204hp ECU Remapping
Considering an ECU remap for your Kia K5 2.4 GDI 204hp? A Stage 1 remap can take this 2010 - 2015 petrol engine from 204 BHP to 229 BHP and from 252 Nm to 271 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia K5 can achieve.
How this engine compares
- 4thof 9 Kia K5 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia K5 2.4 GDI 204hp is a 2.4L naturally aspirated petrol engine producing 204 BHP and 252 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 229 BHP and 271 Nm — a gain of around 25 BHP (12%) and 19 Nm (8%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other K5 2010 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|