BHP+17 hp (10%)
Standard
163 hp
Tuned
180 hp
Torque+31 Nm (16%)
Standard
196 Nm
Tuned
227 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumKia K5 2.0i 163hp ECU Remapping
Considering an ECU remap for your Kia K5 2.0i 163hp? A Stage 1 remap can take this 2010 - 2015 petrol engine from 163 BHP to 180 BHP and from 196 Nm to 227 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia K5 can achieve.
How this engine compares
- 9thof 9 Kia K5 engines by power gain
- 12%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia K5 2.0i 163hp is a 2.0L naturally aspirated petrol engine producing 163 BHP and 196 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 227 Nm — a gain of around 17 BHP (10%) and 31 Nm (16%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other K5 2010 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|