BHP+35 hp (23%)
Standard
150 hp
Tuned
185 hp
Torque+50 Nm (14%)
Standard
350 Nm
Tuned
400 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumFiat 500 X 2.0 Multijet 150hp ECU Remapping
Considering an ECU remap for your Fiat 500 X 2.0 Multijet 150hp? A Stage 1 remap can take this 2019 -> diesel engine from 150 BHP to 185 BHP and from 350 Nm to 400 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat 500 X can achieve.
How this engine compares
- 2ndof 12 Fiat 500 X engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat 500 X 2.0 Multijet 150hp is a 2.0L turbocharged diesel engine producing 150 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 400 Nm — a gain of around 35 BHP (23%) and 50 Nm (14%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 500 X 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 0.9 TwinAir 85hp | 85 → 95 | +10 |