Fiat 500 X 1.3 Firefly Turbo 150hp Remap
Expected gains of +30 BHP and +20 Nm torque
Get Your Free Quote ↓BHP+30 hp (20%)
Standard
150 hp
Tuned
180 hp
Torque+20 Nm (7%)
Standard
270 Nm
Tuned
290 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumFiat 500 X 1.3 Firefly Turbo 150hp ECU Remapping
Considering an ECU remap for your Fiat 500 X 1.3 Firefly Turbo 150hp? A Stage 1 remap can take this 2019 -> petrol engine from 150 BHP to 180 BHP and from 270 Nm to 290 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat 500 X can achieve.
How this engine compares
- 5thof 12 Fiat 500 X engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat 500 X 1.3 Firefly Turbo 150hp is a 1.3L turbocharged petrol engine producing 150 BHP and 270 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 290 Nm — a gain of around 30 BHP (20%) and 20 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 500 X 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|