Fiat 500 X 1.5 GSE Hybrid 131hp Remap
Expected gains of +19 BHP and +40 Nm torque
Get Your Free Quote ↓BHP+19 hp (15%)
Standard
131 hp
Tuned
150 hp
Torque+40 Nm (17%)
Standard
240 Nm
Tuned
280 Nm
Suitability
Moderate (5.5/10)Gains Profile
BalancedHeadroom
MediumFiat 500 X 1.5 GSE Hybrid 131hp ECU Remapping
Considering an ECU remap for your Fiat 500 X 1.5 GSE Hybrid 131hp? A Stage 1 remap can take this 2019 -> petrol mhev engine from 131 BHP to 150 BHP and from 240 Nm to 280 Nm of torque (naturally aspirated). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat 500 X can achieve.
How this engine compares
- 10thof 12 Fiat 500 X engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat 500 X 1.5 GSE Hybrid 131hp is a 1.5L naturally aspirated petrol mhev engine producing 131 BHP and 240 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 280 Nm — a gain of around 19 BHP (15%) and 40 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 500 X 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|