Fiat 500 X 1.0 Firefly Turbo 120hp Remap
Expected gains of +20 BHP and +40 Nm torque
Get Your Free Quote ↓BHP+20 hp (17%)
Standard
120 hp
Tuned
140 hp
Torque+40 Nm (21%)
Standard
190 Nm
Tuned
230 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumFiat 500 X 1.0 Firefly Turbo 120hp ECU Remapping
Considering an ECU remap for your Fiat 500 X 1.0 Firefly Turbo 120hp? A Stage 1 remap can take this 2019 -> petrol engine from 120 BHP to 140 BHP and from 190 Nm to 230 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat 500 X can achieve.
How this engine compares
- 9thof 12 Fiat 500 X engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat 500 X 1.0 Firefly Turbo 120hp is a 1.0L turbocharged petrol engine producing 120 BHP and 190 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 230 Nm — a gain of around 20 BHP (17%) and 40 Nm (21%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 500 X 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|