BHP+25 hp (9%)
Standard
290 hp
Tuned
315 hp
Torque+60 Nm (9%)
Standard
640 Nm
Tuned
700 Nm
Suitability
Limited (3.5/10)Gains Profile
BalancedHeadroom
LowVolvo V60 2.4 D6 290hp ECU Remapping
Considering an ECU remap for your Volvo V60 2.4 D6 290hp? A Stage 1 remap can take this 2015 - 2017 diesel phev engine from 290 BHP to 315 BHP and from 640 Nm to 700 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Volvo V60 can achieve.
How this engine compares
- 31stof 42 Volvo V60 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Volvo V60 2.4 D6 290hp is a 2.4L naturally aspirated diesel phev engine producing 290 BHP and 640 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 315 BHP and 700 Nm — a gain of around 25 BHP (9%) and 60 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other V60 2015 - 2017 Engines
| Engine |
|---|