BHP+20 hp (8%)
Standard
261 hp
Tuned
281 hp
Torque+60 Nm (17%)
Standard
360 Nm
Tuned
420 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumToyota Yaris GR 1.6T ECU Remapping
Considering an ECU remap for your Toyota Yaris GR 1.6T? A Stage 1 remap can take this All petrol engine from 261 BHP to 281 BHP and from 360 Nm to 420 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Yaris can achieve.
How this engine compares
- 4thof 6 Toyota Yaris engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Toyota Yaris GR 1.6T is a 1.6L naturally aspirated petrol engine producing 261 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 281 BHP and 420 Nm — a gain of around 20 BHP (8%) and 60 Nm (17%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Yaris All Engines
| Engine |
|---|