BHP+8 hp (12%)
Standard
68 hp
Tuned
76 hp
Torque+15 Nm (17%)
Standard
90 Nm
Tuned
105 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumToyota Yaris 1.0i 68hp ECU Remapping
Considering an ECU remap for your Toyota Yaris 1.0i 68hp? A Stage 1 remap can take this All petrol engine from 68 BHP to 76 BHP and from 90 Nm to 105 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Yaris can achieve.
How this engine compares
- 6thof 6 Toyota Yaris engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Toyota Yaris 1.0i 68hp is a 1.0L naturally aspirated petrol engine producing 68 BHP and 90 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 76 BHP and 105 Nm — a gain of around 8 BHP (12%) and 15 Nm (17%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Yaris All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|