BHP+9 hp (10%)
Standard
86 hp
Tuned
95 hp
Torque+12 Nm (10%)
Standard
124 Nm
Tuned
136 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumToyota Yaris 1.3 VVT-I 86hp ECU Remapping
Considering an ECU remap for your Toyota Yaris 1.3 VVT-I 86hp? A Stage 1 remap can take this All petrol engine from 86 BHP to 95 BHP and from 124 Nm to 136 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Toyota Yaris can achieve.
How this engine compares
- 5thof 6 Toyota Yaris engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 1%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Toyota Yaris 1.3 VVT-I 86hp is a 1.3L naturally aspirated petrol engine producing 86 BHP and 124 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 95 BHP and 136 Nm — a gain of around 9 BHP (10%) and 12 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Yaris All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|