BHP+25 hp (21%)
Standard
120 hp
Tuned
145 hp
Torque+70 Nm (28%)
Standard
250 Nm
Tuned
320 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighSkoda Superb 1.6 TDI 120hp ECU Remapping
Considering an ECU remap for your Skoda Superb 1.6 TDI 120hp? A Stage 1 remap can take this 2019 -> diesel engine from 120 BHP to 145 BHP and from 250 Nm to 320 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Skoda Superb can achieve.
How this engine compares
- 38thof 42 Skoda Superb engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Skoda Superb 1.6 TDI 120hp is a 1.6L turbocharged diesel engine producing 120 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 320 Nm — a gain of around 25 BHP (21%) and 70 Nm (28%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Superb 2019 -> Engines
| Engine | BHP | Gain |
|---|