BHP+19 hp (16%)
Standard
116 hp
Tuned
135 hp
Torque+50 Nm (25%)
Standard
200 Nm
Tuned
250 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighSeat Ateca 1.0 TSI 116hp ECU Remapping
Considering an ECU remap for your Seat Ateca 1.0 TSI 116hp? A Stage 1 remap can take this 2020 -> petrol engine from 116 BHP to 135 BHP and from 200 Nm to 250 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Seat Ateca can achieve.
How this engine compares
- 16thof 16 Seat Ateca engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Seat Ateca 1.0 TSI 116hp is a 1.0L turbocharged petrol engine producing 116 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 135 BHP and 250 Nm — a gain of around 19 BHP (16%) and 50 Nm (25%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Ateca 2020 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|