BHP+22 hp (8%)
Standard
280 hp
Tuned
302 hp
Torque+120 Nm (9%)
Standard
1400 Nm
Tuned
1520 Nm
Suitability
Moderate (5.5/10)Gains Profile
BalancedHeadroom
LowScania Trucks P-Series 280 ECU Remapping
Considering an ECU remap for your Scania Trucks P-Series 280? A Stage 1 remap can take this All diesel engine from 280 BHP to 302 BHP and from 1400 Nm to 1520 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Scania Trucks P-Series can achieve.
How this engine compares
- 10thof 10 Scania Trucks P-Series engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 87%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Scania Trucks P-Serie 280 is a turbocharged diesel engine producing 280 BHP and 1400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 302 BHP and 1520 Nm — a gain of around 22 BHP (8%) and 120 Nm (9%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other P-Series All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|