BHP+20 hp (7%)
Standard
300 hp
Tuned
320 hp
Torque+25 Nm (6%)
Standard
400 Nm
Tuned
425 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowPorsche Panamera 3.6i 300hp ECU Remapping
Considering an ECU remap for your Porsche Panamera 3.6i 300hp? A Stage 1 remap can take this 970 - 2009 - 2013 petrol engine from 300 BHP to 320 BHP and from 400 Nm to 425 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche Panamera can achieve.
How this engine compares
- 27thof 32 Porsche Panamera engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Porsche Panamera 3.6i 300hp is a 3.6L naturally aspirated petrol engine producing 300 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 320 BHP and 425 Nm — a gain of around 20 BHP (7%) and 25 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Panamera 970 - 2009 - 2013 Engines
| Engine |
|---|