BHP+35 hp (18%)
Standard
200 hp
Tuned
235 hp
Torque+70 Nm (16%)
Standard
450 Nm
Tuned
520 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumPeugeot 508 2.2 HDi 200hp ECU Remapping
Considering an ECU remap for your Peugeot 508 2.2 HDi 200hp? A Stage 1 remap can take this Ph1 - 2010 - 2014 diesel engine from 200 BHP to 235 BHP and from 450 Nm to 520 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 508 can achieve.
How this engine compares
- 7thof 28 Peugeot 508 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 508 2.2 HDi 200hp is a 2.2L turbocharged diesel engine producing 200 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 235 BHP and 520 Nm — a gain of around 35 BHP (18%) and 70 Nm (16%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other 508 Ph1 - 2010 - 2014 Engines
| Engine | BHP | Gain |
|---|