BHP+35 hp (25%)
Standard
140 hp
Tuned
175 hp
Torque+60 Nm (19%)
Standard
320 Nm
Tuned
380 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighPeugeot 508 2.0 HDi 140hp ECU Remapping
Considering an ECU remap for your Peugeot 508 2.0 HDi 140hp? A Stage 1 remap can take this Ph1 - 2010 - 2014 diesel engine from 140 BHP to 175 BHP and from 320 Nm to 380 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 508 can achieve.
How this engine compares
- 7thof 28 Peugeot 508 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 508 2.0 HDi 140hp is a 2.0L turbocharged diesel engine producing 140 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 175 BHP and 380 Nm — a gain of around 35 BHP (25%) and 60 Nm (19%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 508 Ph1 - 2010 - 2014 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 e-HDi 8V 112hp | 112 → 140 | +28 |