BHP+10 hp (8%)
Standard
120 hp
Tuned
130 hp
Torque+15 Nm (10%)
Standard
156 Nm
Tuned
171 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowPeugeot 508 1.6 VTi 120hp ECU Remapping
Considering an ECU remap for your Peugeot 508 1.6 VTi 120hp? A Stage 1 remap can take this Ph1 - 2010 - 2014 petrol engine from 120 BHP to 130 BHP and from 156 Nm to 171 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 508 can achieve.
How this engine compares
- 28thof 28 Peugeot 508 engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 508 1.6 VTi 120hp is a 1.6L naturally aspirated petrol engine producing 120 BHP and 156 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 171 Nm — a gain of around 10 BHP (8%) and 15 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 508 Ph1 - 2010 - 2014 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|