BHP+38 hp (15%)
Standard
252 hp
Tuned
290 hp
Torque+70 Nm (11%)
Standard
620 Nm
Tuned
690 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumMercedes-Benz E 350 CDI 252hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 350 CDI 252hp? A Stage 1 remap can take this W212 - 2013 - 2016 diesel engine from 252 BHP to 290 BHP and from 620 Nm to 690 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 51stof 102 Mercedes-Benz E engines by power gain
- 61%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 350 CDI 252hp is a 3.0L turbocharged diesel engine producing 252 BHP and 620 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 690 Nm — a gain of around 38 BHP (15%) and 70 Nm (11%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other E W212 - 2013 - 2016 Engines
| Engine | BHP | Gain | Torque |
|---|