BHP+19 hp (9%)
Standard
211 hp
Tuned
230 hp
Torque+70 Nm (20%)
Standard
350 Nm
Tuned
420 Nm
Suitability
Good (6/10)Gains Profile
Torque-focusedHeadroom
MediumMercedes-Benz E 250 CGi 211hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 250 CGi 211hp? A Stage 1 remap can take this W212 - 2013 - 2016 petrol engine from 211 BHP to 230 BHP and from 350 Nm to 420 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 92ndof 102 Mercedes-Benz E engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 250 CGi 211hp is a 2.0L turbocharged petrol engine producing 211 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 420 Nm — a gain of around 19 BHP (9%) and 70 Nm (20%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.