BHP+22 hp (18%)
Standard
123 hp
Tuned
145 hp
Torque+13 Nm (9%)
Standard
150 Nm
Tuned
163 Nm
Suitability
Moderate (4.5/10)Gains Profile
Power-focusedHeadroom
MediumFord Figo 1.5 Ti-VCT 123hp ECU Remapping
Considering an ECU remap for your Ford Figo 1.5 Ti-VCT 123hp? A Stage 1 remap can take this 2018 -> ... petrol engine from 123 BHP to 145 BHP and from 150 Nm to 163 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Figo can achieve.
How this engine compares
- 1stof 5 Ford Figo engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Figo 1.5 Ti-VCT 123hp is a 1.5L naturally aspirated petrol engine producing 123 BHP and 150 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 163 Nm — a gain of around 22 BHP (18%) and 13 Nm (9%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.