BHP+19 hp (20%)
Standard
96 hp
Tuned
115 hp
Torque+18 Nm (15%)
Standard
120 Nm
Tuned
138 Nm
Suitability
Moderate (5/10)Gains Profile
Power-focusedHeadroom
MediumFord Figo 1.2 Ti-VCT 96hp ECU Remapping
Considering an ECU remap for your Ford Figo 1.2 Ti-VCT 96hp? A Stage 1 remap can take this 2018 -> ... petrol engine from 96 BHP to 115 BHP and from 120 Nm to 138 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Figo can achieve.
How this engine compares
- 3rdof 5 Ford Figo engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Figo 1.2 Ti-VCT 96hp is a 1.2L naturally aspirated petrol engine producing 96 BHP and 120 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 115 BHP and 138 Nm — a gain of around 19 BHP (20%) and 18 Nm (15%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.