BHP+19 hp (19%)
Standard
101 hp
Tuned
120 hp
Torque+55 Nm (26%)
Standard
215 Nm
Tuned
270 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighFord Figo 1.5 TDCI 101hp ECU Remapping
Considering an ECU remap for your Ford Figo 1.5 TDCI 101hp? A Stage 1 remap can take this 2018 -> ... diesel engine from 101 BHP to 120 BHP and from 215 Nm to 270 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Figo can achieve.
How this engine compares
- 3rdof 5 Ford Figo engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 38%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Figo 1.5 TDCI 101hp is a 1.5L turbocharged diesel engine producing 101 BHP and 215 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 270 Nm — a gain of around 19 BHP (19%) and 55 Nm (26%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Figo 2018 -> ... Engines
| Engine | BHP | Gain |
|---|