BHP+30 hp (26%)
Standard
115 hp
Tuned
145 hp
Torque+57 Nm (28%)
Standard
203 Nm
Tuned
260 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighFiat Multipla 1.9 JTD 115hp ECU Remapping
Considering an ECU remap for your Fiat Multipla 1.9 JTD 115hp? A Stage 1 remap can take this All diesel engine from 115 BHP to 145 BHP and from 203 Nm to 260 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Multipla can achieve.
How this engine compares
- 2ndof 5 Fiat Multipla engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Multipla 1.9 JTD 115hp is a 1.9L turbocharged diesel engine producing 115 BHP and 203 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 260 Nm — a gain of around 30 BHP (26%) and 57 Nm (28%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Multipla All Engines
| Engine | BHP | Gain |
|---|