BHP+25 hp (23%)
Standard
110 hp
Tuned
135 hp
Torque+95 Nm (48%)
Standard
200 Nm
Tuned
295 Nm
Suitability
Excellent (8.5/10)Gains Profile
Torque-focusedHeadroom
HighFiat Multipla 1.9 JTD 110hp ECU Remapping
Considering an ECU remap for your Fiat Multipla 1.9 JTD 110hp? A Stage 1 remap can take this All diesel engine from 110 BHP to 135 BHP and from 200 Nm to 295 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Multipla can achieve.
How this engine compares
- 5thof 5 Fiat Multipla engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 78%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Multipla 1.9 JTD 110hp is a 1.9L turbocharged diesel engine producing 110 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 135 BHP and 295 Nm — a gain of around 25 BHP (23%) and 95 Nm (48%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Multipla All Engines
| Engine | BHP |
|---|