BHP+33 hp (31%)
Standard
105 hp
Tuned
138 hp
Torque+70 Nm (35%)
Standard
200 Nm
Tuned
270 Nm
Suitability
Excellent (8.5/10)Gains Profile
BalancedHeadroom
HighFiat Multipla 1.9 JTD 105hp ECU Remapping
Considering an ECU remap for your Fiat Multipla 1.9 JTD 105hp? A Stage 1 remap can take this All diesel engine from 105 BHP to 138 BHP and from 200 Nm to 270 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Multipla can achieve.
How this engine compares
- 1stof 5 Fiat Multipla engines by power gain
- 52%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Multipla 1.9 JTD 105hp is a 1.9L turbocharged diesel engine producing 105 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 138 BHP and 270 Nm — a gain of around 33 BHP (31%) and 70 Nm (35%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Multipla All Engines
| Engine | BHP | Gain |
|---|