BHP+25 hp (21%)
Standard
120 hp
Tuned
145 hp
Torque+50 Nm (16%)
Standard
320 Nm
Tuned
370 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumFiat 500 L 1.6 JTDM 120hp ECU Remapping
Considering an ECU remap for your Fiat 500 L 1.6 JTDM 120hp? A Stage 1 remap can take this 2012 -> diesel engine from 120 BHP to 145 BHP and from 320 Nm to 370 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat 500 L can achieve.
How this engine compares
- 2ndof 8 Fiat 500 L engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat 500 L 1.6 JTDM 120hp is a 1.6L turbocharged diesel engine producing 120 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 370 Nm — a gain of around 25 BHP (21%) and 50 Nm (16%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 500 L 2012 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 0.9 Twinair 80hp | 80 → 100 | +20 |