BHP+40 hp (33%)
Standard
120 hp
Tuned
160 hp
Torque+65 Nm (30%)
Standard
215 Nm
Tuned
280 Nm
Suitability
Excellent (8/10)Gains Profile
BalancedHeadroom
HighFiat 500 L 1.4 T-jet 120hp ECU Remapping
Considering an ECU remap for your Fiat 500 L 1.4 T-jet 120hp? A Stage 1 remap can take this 2012 -> petrol engine from 120 BHP to 160 BHP and from 215 Nm to 280 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat 500 L can achieve.
How this engine compares
- 1stof 8 Fiat 500 L engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 52%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat 500 L 1.4 T-jet 120hp is a 1.4L turbocharged petrol engine producing 120 BHP and 215 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 280 Nm — a gain of around 40 BHP (33%) and 65 Nm (30%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.