BHP+60 hp (14%)
Standard
430 hp
Tuned
490 hp
Torque+300 Nm (15%)
Standard
1950 Nm
Tuned
2250 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumDAF XF 95 430hp ECU Remapping
Considering an ECU remap for your DAF XF 95 430hp? A Stage 1 remap can take this All diesel engine from 430 BHP to 490 BHP and from 1950 Nm to 2250 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your DAF XF can achieve.
How this engine compares
- 12thof 13 DAF XF engines by power gain
- 86%of the 9,842 engines we hold gain data for see a smaller power increase
- 97%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The DAF XF 95 430hp is a naturally aspirated unknown fuel type engine producing 430 BHP and 1950 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 490 BHP and 2250 Nm — a gain of around 60 BHP (14%) and 300 Nm (15%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other XF All Engines
| Engine |
|---|