BHP+62 hp (14%)
Standard
428 hp
Tuned
490 hp
Torque+350 Nm (18%)
Standard
1950 Nm
Tuned
2300 Nm
Suitability
Moderate (5/10)Gains Profile
BalancedHeadroom
MediumDAF XF 430 428hp ECU Remapping
Considering an ECU remap for your DAF XF 430 428hp? A Stage 1 remap can take this All diesel engine from 428 BHP to 490 BHP and from 1950 Nm to 2300 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your DAF XF can achieve.
How this engine compares
- 11thof 13 DAF XF engines by power gain
- 88%of the 9,842 engines we hold gain data for see a smaller power increase
- 98%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The DAF XF 430 428hp is a naturally aspirated unknown fuel type engine producing 428 BHP and 1950 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 490 BHP and 2300 Nm — a gain of around 62 BHP (14%) and 350 Nm (18%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other XF All Engines
| Engine |
|---|