BHP+78 hp (19%)
Standard
410 hp
Tuned
488 hp
Torque+236 Nm (12%)
Standard
2000 Nm
Tuned
2236 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumDAF XF 106 410hp ECU Remapping
Considering an ECU remap for your DAF XF 106 410hp? A Stage 1 remap can take this All diesel engine from 410 BHP to 488 BHP and from 2000 Nm to 2236 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your DAF XF can achieve.
How this engine compares
- 6thof 13 DAF XF engines by power gain
- 95%of the 9,842 engines we hold gain data for see a smaller power increase
- 96%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The DAF XF 106 410hp is a turbocharged diesel engine producing 410 BHP and 2000 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 488 BHP and 2236 Nm — a gain of around 78 BHP (19%) and 236 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other XF All Engines
| Engine | BHP | Gain | Torque |
|---|