BHP+35 hp (19%)
Standard
180 hp
Tuned
215 hp
Torque+100 Nm (25%)
Standard
400 Nm
Tuned
500 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighCitroën Jumper 3.0 HDi 180hp ECU Remapping
Considering an ECU remap for your Citroën Jumper 3.0 HDi 180hp? A Stage 1 remap can take this 2015 - 2019 diesel engine from 180 BHP to 215 BHP and from 400 Nm to 500 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën Jumper can achieve.
How this engine compares
- 10thof 20 Citroën Jumper engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën Jumper 3.0 HDi 180hp is a 3.0L turbocharged diesel engine producing 180 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 215 BHP and 500 Nm — a gain of around 35 BHP (19%) and 100 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Jumper 2015 - 2019 Engines
| Engine | BHP | Gain |
|---|