BHP+50 hp (38%)
Standard
130 hp
Tuned
180 hp
Torque+40 Nm (13%)
Standard
320 Nm
Tuned
360 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighCitroën Jumper 2.2 HDi 130hp ECU Remapping
Considering an ECU remap for your Citroën Jumper 2.2 HDi 130hp? A Stage 1 remap can take this 2015 - 2019 diesel engine from 130 BHP to 180 BHP and from 320 Nm to 360 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën Jumper can achieve.
How this engine compares
- 6thof 20 Citroën Jumper engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën Jumper 2.2 HDi 130hp is a 2.2L turbocharged diesel engine producing 130 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 360 Nm — a gain of around 50 BHP (38%) and 40 Nm (12%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Jumper 2015 - 2019 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 BlueHDI 110hp | 110 → 200 | +90 |