BHP+20 hp (13%)
Standard
160 hp
Tuned
180 hp
Torque+60 Nm (17%)
Standard
350 Nm
Tuned
410 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumCitroën Jumper 2.2 HDi 160hp ECU Remapping
Considering an ECU remap for your Citroën Jumper 2.2 HDi 160hp? A Stage 1 remap can take this 2015 - 2019 diesel engine from 160 BHP to 180 BHP and from 350 Nm to 410 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën Jumper can achieve.
How this engine compares
- 19thof 20 Citroën Jumper engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën Jumper 2.2 HDi 160hp is a 2.2L turbocharged diesel engine producing 160 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 410 Nm — a gain of around 20 BHP (12%) and 60 Nm (17%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Jumper 2015 - 2019 Engines
| Engine | BHP | Gain |
|---|