BHP+25 hp (28%)
Standard
90 hp
Tuned
115 hp
Torque+45 Nm (21%)
Standard
215 Nm
Tuned
260 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighCitroën C3 1.6 HDI 16V 90hp ECU Remapping
Considering an ECU remap for your Citroën C3 1.6 HDI 16V 90hp? A Stage 1 remap can take this 2010 - 2013 diesel engine from 90 BHP to 115 BHP and from 215 Nm to 260 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën C3 can achieve.
How this engine compares
- 9thof 33 Citroën C3 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 25%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën C3 1.6 HDI 16V 90hp is a 1.6L turbocharged diesel engine producing 90 BHP and 215 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 115 BHP and 260 Nm — a gain of around 25 BHP (28%) and 45 Nm (21%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other C3 2010 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.1i 61hp | 61 → 68 | +7 |