BHP+7 hp (10%)
Standard
68 hp
Tuned
75 hp
Torque+14 Nm (12%)
Standard
116 Nm
Tuned
130 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumCitroën C3 1.0 VTi 68hp ECU Remapping
Considering an ECU remap for your Citroën C3 1.0 VTi 68hp? A Stage 1 remap can take this 2010 - 2013 petrol engine from 68 BHP to 75 BHP and from 116 Nm to 130 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën C3 can achieve.
How this engine compares
- 32ndof 33 Citroën C3 engines by power gain
- 1%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën C3 1.0 VTi 68hp is a 1.0L naturally aspirated petrol engine producing 68 BHP and 116 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 75 BHP and 130 Nm — a gain of around 7 BHP (10%) and 14 Nm (12%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other C3 2010 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|