BHP+22 hp (11%)
Standard
203 hp
Tuned
225 hp
Torque+18 Nm (7%)
Standard
262 Nm
Tuned
280 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowChrysler Sebring 2.7 V6 203hp ECU Remapping
Considering an ECU remap for your Chrysler Sebring 2.7 V6 203hp? A Stage 1 remap can take this All petrol engine from 203 BHP to 225 BHP and from 262 Nm to 280 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chrysler Sebring can achieve.
How this engine compares
- 2ndof 5 Chrysler Sebring engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Chrysler Sebring 2.7 V6 203hp is a 2.7L naturally aspirated petrol engine producing 203 BHP and 262 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 225 BHP and 280 Nm — a gain of around 22 BHP (11%) and 18 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Sebring All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|